Inkjet Design, Materials & Fabrication

Fabrication of Differential Amplifiers Using Inkjet Printing and Single Wall Carbon Nanotubes

Sarvestani R.K., Wright B., Triyasakorn K., Utah Valley University, US

Fabrication of Differential Amplifiers Using Inkjet Printing and Single Wall Carbon Nanotubes Inkjet printing is a non-contact method in which small droplets of conductive material such as silver nanoparticle ink or functional material are deposited [...]

Formation and Modeling of Droplet Ejection for Electrohydrodynamic Inkjet Printing

Choi J., Lee S., Son S.U., Sungkyunkwan University, KR

EHD(Electrohydrodynamic) inkjet printing based on electrospray and EHD discharging for tiny droplet/jet is known to be able to generate higher resolution and higher aspect ratio of patterns than the conventional inkjet printing(Lee, 2014). EHD inkjet [...]

Preparation of charged droplets via electro-hydrodynamic spraying of polyelectrolyte solutions for the removal of floating particles with less than 10 um (PM10)

Lee K-I., Lee K., Lee K-I., Lee K., Kim S., Korea Electronics Technology Institute, KR

Ambient air quality tends to be worse due to the particle pollution in the region where the rapid commercialization is going on. Particulate matter (PM) describes fine inhalable particles with the specific diameter and smaller, [...]

Inkjet Design, Materials & Fabrication

Development of a Gold Nanoparticle Conductive Ink with a Relatively Low Sintering Temperature

Hamacher S., Bachmann B., Yakushenko A., Forschungszentrum Jülich, DE

Inkjet printing is a widely used and a well-known technique, which has been recently used for deposition of functional materials, such as conductive inks for the fabrication of low-cost electronic systems. Nowadays, a variety of [...]

Inkjet Printing of High Index Zirconia Nanocomposite Materials

Healy M.D., Guschl P., Wang X., Weinstein M., Pixelligent Technologies LLC, US

Abstract High refractive index (RI) nanocomposites have properties which surpass traditional polymers while maintaining manufacturability. Nanocrystal-polymer nanocomposites, when inkjet-printed, are useful to many display components and aid the development of next generation displays. This paper [...]

Inkjet printing of carbon nanospheres

Orrill M., Abele D., Banek N., Wagner M., LeBlanc S., The George Washington University, US

Proposed applications of drop-on-demand (DOD) inkjet printing extend beyond printing of text and graphics to include rapid manufacturing of thin electrical devices. The most commonly printed electronic materials are silver nanoparticles due to their potentially [...]

One-dimensional simulation of drop breakup in inkjet

Jiang H., Tan H., Washington State University Vancouver, US

Drop-on-demand (DoD) inkjet printing technology has a wide variety of applications in research and manufacturing, such as 3D printing, functional material printing, MEMS fabrication and tissue engineering, due to its advantage of high precision, simple [...]

Inkjet Design, Materials & Fabrication

All-printed liquid crystal display devices made from sol-gel Indium tin oxide(ITO) ink

Xia N., Gerhardt R.A., Georgia Institute of Technology, US

Indium tin oxide (ITO) is the most widely used transparent conducting oxide due to its high conductivity and transparency. It is currently used in a wide range of devices that require transparent conducting electrodes. Currently, [...]