Coatings, Surfaces & Membranes – TechConnect Briefs

Brand Protection and Authentication Enabled By Frangible Polymer Technology

DiMaio J., Tetramer Technologies, LLC, US

Tetramer has developed a unique technology to produce pre-stressed frangible, polymeric coatings. These can be applied using traditional thin-film coating and curing techniques or more advanced 3D-printing techniques. The ability to produce stable, pre-stressed films [...]

Anti-Fouling CVD Coatings and Surface Modifications for Industrial Applications

Patterson L., Smith D., SilcoTek Corporation, US

Academia has witnessed a surge in novel coating materials and methods to control the behavior of surfaces in a variety of applications, specifically where non-stick properties (low surface energy) are desired. However, few of these [...]

Molecular sieve membranes made in thin sheet form

Liu W., Molecule Works Inc., US

A new molecular sieve membrane technology will be introduced in this presentation from fundamental designs to performance characteristics. Molecular sieve materials are well known for their molecular sieving functions, i.e., distinguishing individual molecules based on [...]

Smart Antimicrobial Coating with Endless Applications

Tiwari A., Chaturvedi A., FLORA COATINGS, US

Historically corrosion protection has been achieved through use of hexavalent chromium ions along with heavy metals in paints. These chemical ingredients are highly toxic to environment and human health. In-fact, Hex-Chrome is a known human [...]

Graphene – Epoxy Composites for Anti-Corrosion Coatings

Bosnick K., Benhalima A., Chapleau N., Tefashe U.M., Bergren A.J., Yang Q., Champagne M.F., National Research Council Canada, CA

It is important to protect steel infrastructure, such as pipelines, from environmental corrosion. The primary method for this protection is by utilizing coatings, especially epoxy (EP) coatings. In recent years graphene has shown a great [...]

Enhancement of pure titanium localized corrosion resistance by chemical oxidation

Prando D., Brenna A., Diamanti M.V., Ormellese M., Pedeferri M.P., Politecnico di Milano, IT

Titanium and its alloys are widely appreciated for their high corrosion resistance in environments that are critical even for high-end stainless steel (duplex UNS S31803 and UNS S32750), such as concentrated chlorides [1]. This resistance [...]

Fabrication of superhydrophobic PVDF membranes with PTFE nano-film surface coatings

Abdulhussein A.T., Kannarpady G.K., Biris A.S., University of Arkansas at Little Rock, US

Due to their outstanding corrosion resistance, wear resistance, thermal stability, and chemical stability, polyvinylidene fluoride (PVDF) membranes are extensively used for membrane distillation, membrane contactor, oil/water separation, and wastewater treatment. Modifying a PVDF membrane with [...]

Combining a Fluoroalkylsiloxane and Ion Implantation for Hydrophilic/Hydrophobic Patterning

Cook M.J., Johnston J.H., Leveneur J., Victoria University of Wellington, NZ

We present a novel method of producing hydrophilic/hydrophobic patterning on several different substrates using a novel two-step process. The developed process involves a simple surface functionalization with a fluoroalkylsiloxane (FAS), followed by masked ion implantation. [...]

Solid-Liquid Work of Adhesion

Gulec S., Tadmor R., Das R., Liu J., N'guessan H., Shah M., Wasnik P., Yadav S.B., Lamar University, US

Centrifugal Adhesion Balance (CAB) is used for measuring directly solid-liquid work of adhesion by inducing an ever-increasing normal force which pulls on the droplet while keeping zero lateral force until the liquid-solid contact area starts [...]

Wear-resistant coatings for solar cell panels

Song K., Arizona State University, US

This research studied the relationship between nano-particle orientation and wear resistance. Nano-particle orientations were tailored through flow-assisted spray technical and parallel, randomly distributed, and preferentially vertical configurations were achieved. Surface damage tests were managed using [...]

Photocatalytic activity of nanotubular TiO2 films obtained by anodic oxidation: a comparison in gas and liquid phase

Sanabria B.E., Strini A., Schiavi L., Diamanti M.V., Pedeferri M.P., Politecnico di Milano, IT

The immobilization of nanostructured photocatalysts is of great importance in the purification of both polluted air and liquids (e.g. industrial wastewaters). Titanium dioxide films with nanotubular morphology and good photocatalytic efficiency in both environments can [...]

Papers: