Papers – Page 7 – TechConnect Briefs

Integrated, Renewable Distributed Generation w/ Storage

Olson D., P&E Automation, Inc., US

Case study of a successful integrated renewable distributed generation project for demand response at a large U.S. aerospace manufacturer site.Project incorporated wind, pump-storage hydro, waste compressed air storage power generators and utility company interfaces.

New model of seven layers in PEMFC

Rakhshanpouri S., Rowshanzamir S., School of Chemical Engineering, IR

This model is an isothermal, isobar, one-dimensional and steady-state model for a polymer electrolyte fuel cell with a 117 Nafion membrane that considers seven-layer of fuel cell. In former years, Springer and colleagues presented the [...]

High Performance Solid Polymer Electrolyte Membranes Prepared from Polyether Ether Ketone Composites

Wu G.M., Hsu I.C., Lin S.J., Chang Gung University, TW

High performance solid polymer electrolyte membranes (SPEM) were prepared from polyether ether ketone (PEEK) with high mechanical strength and thermal stability. The sulfonation reaction improved membrane hydrophilicity and water absorbility, and thus increased ionic conductivity [...]

Utilization the heat accumulator in large heating system

Bujalski W., Badyda K., Milewski J., Warchol M., Warsaw University of Technology, PL

Cogeneration is currently one of the cheapest ways to generate electricity. The European Union promotes systems for combined heat and power generation. In Europe in general – and Poland in particular – there are numerous [...]

Identification of Battery Models for Enhanced Battery Management

Sitterly M., Wang L.Y., Wayne State University, US

A large-scale battery system consists of hundreds even thousands battery cells, which have different characteristics even when they are new, and change with time and operating conditions due to aging, operational conditions, and chemical property [...]

Performance Improvement of Fuel Cell using Platinum Functionalized Aligned Carbon Nanotubes

Liu D., Liu J., Goenaga G., Liu D., Liu J., Texas A&M University-Kingsville, US

Proton exchange membrane fuel cells (PEMFCs) are the energy conversion devices with ultrahigh efficiency, zero emission, and high flexibility of the fuel supplies. This study has optimized growth variables of the aligned carbon nanotubes (ACNT) [...]

Activation of Phosphate Olivines LiMPO4 (M = Fe, Mn) by Functionalized Carbon Nanotubes: Application for Cathode Materials of Li-Ion Battery

Kavan L., J. Heyrovsky Institute of Physical Chemistry, CZ

The nanotube-mediated redox wiring is based on a synergic action of adsorbed redox-active molecule, which provides the interfacial charge transfer to the surface and the single-walled carbon nanotube (SWNT), which transports charge to longer distances [...]

Novel High Energy Density Supercapacitors

Risser S., Tan B., Castaneda H., Spahr K., Stasik M., Battelle Memorial Institute, US

Cost-effective electrical storage is a critical need for enhancing current devices and enabling new devices and technologies. One of the storage types Battelle has been actively investigating is hybrid supercapacitors. Achieving high energy density in [...]

Permanent Distributed Load Reduction — A low-cost grid capacity solution

Sandersen J., Orion Energy Systems, US

The wholesale changeover of inefficient lighting can have a dramatic and sustainable impact on the nation’s stressed electric grid through permanent distributed load reductions, or PDLR. PDLR requires the deployment of energy-efficient technology at the [...]

Location Based Environment Sensing and Information Report using Cognitive Radio for Smart Grid Security

Khairatkar M., Mangir T., California State University Long Beach, US

In this paper we present an approach to security through location based environment sensing and information report using cognitive radio. The term environment sensing is used to sense physical quantities in the surrounding area and [...]