Sungkyunkwan University – Page 2

High Aspect Ratio EHD Printing with High Viscosity Ink Ejection

Choi J., Lee S., Kim Y.J., Son S.U., An K.C., Sungkyunkwan University, KR

EHD (Electro-hydro-dynamics) printing technology, one of the printing technologies based on EHD discharging theory, can be patterning of high resolution and high aspect ratio compared to conventional inkjet printing systems. We have been investigating to [...]

Micro Patterning of Organic Solvents on OLED Device Using EHD Inkjet Technology

Lee S-H., Nguyen X.H., Jo W., Ko H.S., Sungkyunkwan University, KR

Although there are many modes of the ejection mechanism from the EHD nozzle [2], a cone-jet mode, a pulse-jet mode and a micro-dripping mode have been analyzed by capturing the jetting phenomena using organic solvents [...]

Numerical Study on the Mixing Performance of Ring-Type Electroosmotic Micromixer with Configurations of Obstacle in the Mixing Chamber

Seo H.S., Kim Y.J., Sungkyunkwan University, KR

Rapid and efficient mixing is important for many microfluidic applications but challenging process in many microfluidic systems that perform complex chemical synthesis and analysis. Most existing microfluidic mixing systems are limited to low Reynolds number [...]

Array-Nozzle EHD Print Head and its Drop-on-Demand Experimentation

Son S., Lee S., Lee W.H., Kim Y.J., An K., Choi J., Sin J., Lee S., Lee W.H., Wijesundara M., Stephanou H.E., Sungkyunkwan University, KR

EHD (electrohydrodynamics) printing has recently attracted attention for micro/nano size pattern devices due to it can make very small droplet than nozzle diameter and possibility of the use of various ink such as including metal, [...]

Propagation and Emissions of Ammonia-substituted Hydrogen/Air Flames

Lee J-H., Lee S.I., Lee J-H., Lee S.I., Kwon O.C., Sungkyunkwan University, KR

In order to evaluate the potential of partial ammonia (NH3) substitution to improve the safety of hydrogen (H2) use in general and the performance of internal combustion engines in particular, the propagation, development of surface [...]

Study of the phenomenon of meniscus deformation and ejection by pulse voltage and frequency in drop-on-demand EHD printing

Son S., An K., Kim Y.J., Choi J., Lee S., Sungkyunkwan University, KR

EHD (electrohydrodynamics) printing has recently attracted attention for micro/nano size pattern devices due to it can make very small droplet than nozzle diameter and possibility of the use of various ink such as including metal, [...]

The Investigation of Electrostatic Induced Inkjet Printing System for the Ejection of a Stable Micro/Nano Droplet

Choi J., Kim Y.J., Son S.U., Chul An K., Lee S., Sungkyunkwan University, KR

Inkjet printing technology has recently attracted considerable attention for a simple fabrication and advanced pattering process during the past decade. In order to manufacture advanced inkjet printing technology, my team has alternatively proposed and investigated [...]

Graphene and polymer composite using easy soluble expanded graphite

Lee J-H., Sungkyunkwan University, KR

ESEG was prepared from a fluorinated graphite intercalation compound (FGIC) - C2F∙nClF3 containing inorganic volatile intercalating agent ClF3. The severe expanded state, together with high specific surface area of the ESEG can give us essential [...]

Electronic properties control of single-walled carbon nanotube using spontaneous redox process of MnO4- and carbon nanotube

Shin D.-W., Lee J-H., Yoo J.-B., Sungkyunkwan University, KR

We investigated the effectiveness of electronic properties with single-walled carbon nanotube through spontaneous redox-reaction between the metal oxide ion such as MnO4- and carbon nanotube. The SWCNTs synthesized by the arc discharge method were used. [...]

Measured and predicted performance of a micro-thermophotovoltaic device with a heat-recirculating micro-emitter

Park J.H., So J.S., Moon H.J., Kwon O.C., Sungkyunkwan University, KR

A new configuration of a 1-10 W micro-thermophotovoltaic (micro-TPV) device with a heat-recirculating micro-emitter is studied experimentally and computationally. In the micro-TPV device thermal energy is directly converted into electrical energy through thermal radiation without [...]