Papers:
Development of Innovative Packaging Characterized by Active Thermal Insulation Properties
Garbagnoli P., Altomare L., Del Curto B., De Nardo L., Del Curto B., Cigada A., Politecnico di Milano, IT
An innovative composite material based on cellulose matrix has been developed. Active thermal insulation properties have been conferred to the material through the integration of Phase Change Materials (PCM) into the matrix. Processing techniques of [...]
Self-cleaning ability and cooling effect of TiO2-containing mortars
Diamanti M.V., Paolini R., Zinzi M., Ormellese M., Fiori M., Pedeferri MP., Politecnico di Milano, IT
This work focuses on the characterization of a self-cleaning and photocatalytic system for building façades, aimed at improving urban surfaces and the surrounding air quality, and decreasing energy consumption. Mortars containing anatase TiO2 nanopowders were [...]
Evaluation of PCM-cardboard composite materials in dynamic thermal conditions
In recent years, the use of smart materials to resolve environmental problems in building applications has been increasingly widespread. In particular, Phase Change Materials (PCMs) are used to improve thermal performance of air conditioning system [...]
Minimize Thermal Edge Losses with Stainless Steel Envelopes for Vacuum Insulation Panels (VIPs)
Feinerman A.D., Gupta P., Foster C., Yarbrough D.W., Kosny J., Thermal Conservation Technologies, US
Traditional Vacuum Insulation Panels (VIPs) have either a polymer/aluminum film or metallized polymer film exterior. In either case the VIPs are too fragile to be directly attached to a building’s envelope without a superstructure. The [...]
Life Cycle Assessment of a Nano TiO2 Coating Self-Cleaning Float Glass
Ecodesign of nanoTiO2 self-cleaning float glasses with the LCA (life Cycle Assessment) methodology.
Technology Prioritization: Transforming the U.S. Building Stock to Embrace Energy Efficiency
The U.S. Buildings sector is responsible for about 40% of the national energy expenditures. This is mainly due to wasteful use of resources and practices lacking energy efficiency consideration. This paper discusses the role of [...]
High Efficiency Nanofiber Reflectors for Lighting Applications
Nanofibers are an advanced optical media that can deliver extremely high reflectance values over large areas. The materials are made in high volumes in a roll-to-roll process using known spinning technologies. Nanofiber reflectors are particularly [...]
Life cycle considerations for engineered nanomaterials: A case study for nano-enabled coatings on drywall
Engineered nanomaterials are being incorporated into elements of the building industry. Advantages such as increased resistance to ultraviolet damage, wear and fouling of construction materials are relevant to coatings. Particles engineered at the nanometer size [...]
Recovery of phosphate from surface waters using a calcium silicate composite material for potential application in environmental remediation
In many locations, contamination of surface waters by phosphate due to agricultural run-off is becoming a major environmental concern. Currently, there are no effective means for its removal, due to the low phosphate concentration (< [...]
Electrospinning of decorated nanofibers with active cerium oxide nanoparticles
Cerium oxide nanoparticles (ceria NPs) attract a great research and commercial interests due to its observable capability to capture radicals and dissolved oxygen molecules. Keeping ceria NPs in active form; containing Ce+3 ions with O-vacancies, [...]
Photocatalytic Performance of Ag modified and doped TiO2 nanoparticles
In this work, TBOT was used as the titanium source for preparation of TiO2 nanoparticles, followed by calcination at 500°C for 2 hours to achieve fine TiO2 nanoparticles powder (S1). The obtained S1 powder was [...]
Quinaldine and Indole based pH Sensitive Colorimetric Chemosensor and their application of nanofiber
Colorimetric chemosensors are now considered as one of the most effective analytical method used in the environment monitoring. Colorimetric chemosensors for pH sensing can easily detect the primary danger or change of the surrounding environment [...]
Life Cycle Analysis of Plastics in Southeast Queensland – Recycled Plastics versus Bio plastics in Electronics
Electronics and electronic products are increasingly becoming part of life. However electronic product manufacturing involves a number of energy and chemical process steps. Energy use in material extraction for electronic products, chemical use, product manufacturing [...]
Journal: TechConnect Briefs
Volume: 3, Nanotechnology 2013: Bio Sensors, Instruments, Medical, Environment and Energy (Volume 3)
Published: May 12, 2013
Industry sectors: Advanced Materials & Manufacturing | Energy & Sustainability
Topics: Materials for Sustainable Building, Sustainable Materials
ISBN: 978-1-4822-0586-2